HOME PRODUCTS HOME & BUILDING AUTOMATION TESTIMONIALS CONTACT US
Gator Buddy / Pod Buddy Buddy Controllers Dairy Shed Automation VSDs
Switchboards Industrial Plugs & Sockets Other....  
 

 

DOL Starters - (Direct On-Line Starters)
This is the simplest type of Motor Starter, a DOL starter also contain protection devices.  DOL starting is sometimes used to start small water pumps, compressors and the like.

Different sizes and options are available.....                                                       
0.55kW up to 18.5kW

 

 

Available with Isolators and Overloads
(varying combinations)


Call us today to discuss your individual requirements and pricing.
 

 Download DOL Flyer
Capacitors
Attitude Switchboards uses and supplies LIFASA power factor correction capacitors manufactured in Spain. Cylindrical capacitors from 1.5KVAR to 30 KVAR at 400 Volt 50Hz are stocked in New Zealand, other ratings are available on application.
The POLT and POLB ranges of capacitors are particularly suited to static correction of induction motors. For application with detuning reactors a different family of capacitors is recommended
 

What is power factor?
Power factor is the ratio of the KW to the KVA of the load and is a measure of how efficiently the current is being used. If the power factor is less than 1.0, the current is not being used to maximum efficiency.
 What causes a bad power factor?
There are two types or sources of reduced power factor, Displacement Power Factor and Distortion Power Factor.

Download Capacitor Brochure
Pressure Transducers
 Pressure Transducers are used to measure the pressure/vacuum of liquids and gasses and then convert this to an electrical signal which is typically 4-20mA or 0.5V

Pressure Transducers are commonly used in pump control systems to regulate pressure or determine that the pressure is within certain preset limits, using used in conjunction with PLCs or VSDs.

 The MPM489 pressure transmitter is used for the measurement and control of petroleum, chemical industries, electric power, hydrology, irrigation and flow pressure measurements
 
  • Reliable performance, easy application
  • Short protection and reverse polarity protection
  • Measure gauge, absolute and sealed gauge
  • Intrinsic safe version, conforming to Standard ExiallCT6 of GB3836.4
  • Exd product conforms to Standard GB3836.2, and Exd certificate is approved. Exd sign is ExdⅡCT6
  • Ship-use product conforming to CCS Rules of Classification of Sea-going Steel Ships (2006)
  • CE and RoHS approved
  • Pressure range: -0.1…0～0.01…100MP
  • Pressure type: gauge/ absolute / sealed gauge
   
Heatmiser - Effective Temperature Control

With comfort being a priority our range of room and under floor heating thermostats offer complete control of any system.

Theses standard products enable easy installation of new units or replacement of existing thermostats.

 

Heatmiser PRT
The PRT is our 5/2 days digital thermostat and programmer in-one.  Providing up to 4 different temperatures a different times of the day

Heatmiser PRT-E
The Heatmiser PRT-E has been developed specially with electric under floor heating in mind.  This combination model has two operating modes which can be selected via software by the installer
   
 

IP Ratings

IP Explanation and Ratings
EN 60529 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture.  This classification system utilizes the letters “IP” (Ingress Protection) followed by two or three digits  (a third digit is sometimes used. An “x” is used for one of the digits if there is only one class of protection; i.e. IPX4 which addresses moisture resistance only). 

Degrees of Protection—First Digit
The first digit of the IP code indicates the degree that persons are protected against contact with moving parts (other than smooth rotating shafts etc) and the degree that equipment is protected against solid foreign bodies intruding into an enclosure.

Degrees of Protection—Second Digit
The second digit indicates the degree of protection of the equipment inside the enclosure against the harmful entry of various forms of moisture (e.g dripping, spraying submersion etc)

   
Other Products Available
Stainless Steel Enclosures Transformers
Earth Neutral Bars Cable Ties
Glands, Bushes, Bungs, Hexnuts Push Buttons, Pilot Lights
Potentiometers Rope Switches
Limit Switches Overloads
MCBs Terminals
Contactors Relays
Manual Motor Starters Soft starters
PLCS  


Plus much more - we carry a large range of stock from ABB and many other suppliers.  Call us today to discuss your requirements.

We can customise any of these products to suit your requirements, or build something totally different for you... Give us a call.

 

Attitude Switchboards Ltd
117 Crinan Street
P O Box 1343
Invercargill, New Zealand

Ph. +64 3 214 6903
Fax. +64 3 214 6904

Email. sales@attitudegroup.co.nz